Kenco-engineering KUST Switch Bedienungsanleitung PDF herunterladen

KENCO ENGINEERING COMPANY

P.O. BOX 470426 TULSA, OK 74147-0426 ● PHONE: (918) 663-4406 FAX: (918) 663-4406

www.kenco-eng.com e-mail: [email protected]

MODEL KUST ULTRASONIC SWITCH

INSTALLATION / OPERATION INSTRUCTIONS

GENERAL DESCRIPTION

The KUST Series Ultrasonic Level Switches are ideal, low cost solutions for many liquid level control applications. They

operate in a wide variety of services.

PRINCIPLE OF OPERATION

Ultrasonic switches use piezoelectric crystals to transform electrical energy into mechanical motion (sound). The

Transmit Crystal sends a pulse of sound through the space between the crystals, to the Receive Crystal. If the space is

filled with air, gas, or vacuum, the Receive Crystal does not detect the sound pulse. However, if the space is filled with

liquid, any liquid, the pulse is detected by the Receive Crystal, and the switch output changes.

MODEL DESCRIPTION

KUST - - - - - - - -

Input Power

Output

Switch Mounting

Sensor Material

Sensor Length

Process Connection

Flange Size

Flange Material

INSTALLATION

Unpack the switch carefully. Inspect all units for damage. Report any damage to carrier immediately. Check the

contents against the packing slip and purchase order.

Kenco’s Ultrasonic Switches are manufactured to the highest quality standards. These switches use electronic

components that can be damaged by static electricity. Make sure that you are properly grounded before starting

installation. Insure that all electrical connections are properly made, and that there are no “floating” connections.

Sensor Length

Process Connection

Flange Size

Flange Material

Description Code Description Code Description Code Description Code

Standard (2.25”) 00 ¾” NPT 1 None None

*Inches (3” – 120”) xxx 150# Flange F 1-1/2” 0 Carbon Steel A

*316SS Sensor Only 300# Flange H 1 1 316SS S

Sanitary Flange S 2 2

3 3

Input Power

Output

Description Code Description Code

115Vac 1 10A DPDT 1

230Vac 2 Two-wire 2

24Vdc 3

12Vdc 4

Switch Mounting Sensor Material

Description Code Description Code

Integral 1 316SS S

*Remote 2 Tefzel

*Remote 10ft. (std.)

100ft. (max)

1 2 3 4

Inhaltsverzeichnis

Seite 1 - KENCO ENGINEERING COMPANY

KENCO ENGINEERING COMPANY P.O. BOX 470426 TULSA, OK 74147-0426 ● PHONE: (918) 663-4406 FAX: (918) 663-4406 www.kenco-eng.com e-mail: info@kenco-eng.

Seite 2

Operational Check Before installing the switch a simple operational check should be performed, as follows: 1. Fill a container with water 2. Open t

Seite 3 - 4 or 20mA

Relay Version 1. Connect power wiring a. AC – Hot (L2), Neutral (L2), and Ground (G) b. DC – Positive (L1), Negative (G) 2. Connec

Seite 4

TROUBLESHOOTING Problem Solution Check wiring; verify that the correct input voltage is applied Verify that liquid is filling the sensor gap Check f

Kommentare zu diesen Handbüchern

Keine Kommentare

Kenco-engineering KUST Switch Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sensoren Kenco-engineering KUST Switch herunter. Kenco Engineering KUST Switch User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Kenco-engineering KUST Switch